Router 7613 boot problem

Leonardo Pena Davila · ‎03-24-2009

Hi guys, I have a router 7613 with a supervisor 720. each time I reboot it I have the follow:

***

*** --- SHUTDOWN NOW ---

***

Mar 24 09:55:16: %SYS-SP-5-RELOAD: Reload requested

Mar 24 09:55:16: %OIR-SP-6-CONSOLE: Changing console ownership to switch process

or

Mar 24 09:55:16: %SYS-SP-3-LOGGER_FLUSHED: System was paused for 00:00:00 to ens

ure console debugging output.

System Bootstrap, Version 8.4(2) Release

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

rommon 1 >

I am using only one supervisor the standby blade is not inserted.

the onfiguration register is 0x2102

What the problem could will be?

Thanks!

a.alekseev · ‎03-24-2009

in rommon set correct BOOT variable

after that enter command "sync"

It should fix your problem.

Leonardo Pena Davila · ‎03-24-2009

Hi this is what I have:

router#show bootvar

BOOT variable = ,1;sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin,

1;

CONFIG_FILE variable =

BOOTLDR variable =

Configuration register is 0x2102

Standby is not present.

rommon 1 > set

PS1=rommon ! >

LOG_PREFIX_VERSION=1

CONFIG_FILE=bootflash:switch.cfg

?=0

BOOT=bootdisk:,1;

SLOTCACHE=cards 1=104(241@3,241@300),2=104(41@FF,41@FF00),3=104(167@1,167@100),4

=104(1E7@1,-);

CRASHINFO=bootflash:crashinfo_20090227-190703

TYFIB_BLOCK_ALLOC=

BSI=0

ACL_DENY=0

PF_REDUN_CRASH_COUNT=0

How can I fix it? can yo give a example please?

Thnks

Regards

Yudong Wu · ‎03-24-2009

It looks like you have an extra BOOT variable " ,1".

BOOT variable = ,1;sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin,

try to remove all boot statement in your current config and then add the one you need back. After that, check the output of "show bootvar".

a.alekseev · ‎03-24-2009

in rommon do the following

BOOT=sup-bootdisk:s72033-advipservicesk9_wan-mz.122-18.SXF15a.bin

sync

and check "boot system" in the configuration