03-24-2009 09:36 AM - edited 03-18-2019 10:44 PM
Hello I have a UC520 with only two pots lines for calls in a line hunt. There are no DID's, only the number for the pots line hunt group. I'am using a 4 digit dial plan. What do i have to configure to strip the last 4 digits and send it to unity express for the AA? I already have a dial-peer for the 4 digits pointing to unity express. Do I need to perform a number translation rule to truncate it down to 4 digits, or use a dial-plan? Thanks
03-24-2009 10:00 AM
You can configure the following. This example uses 1234 for the AA DN.
voice-port 0/1/0
connection plar 1234
voice-port 0/1/1
connection plar 1234
Hope this helps.
Brandon
03-24-2009 10:24 AM
Brandon,
so what will happen here is when the voice-port comes up to recieve a call it will automatically dial my AA extension? What about outgoing calls such a 911 or, this won't have an effect on them right? It's only incoming. I believe my outgoing dial-peers are all correct. Thanks
Jason
03-24-2009 10:24 AM
Jason,
That is correct. No effect on outgoing calls.
Brandon
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: