UC520 with two FXO lines for calls - number trans?

steigja · ‎03-24-2009

Hello I have a UC520 with only two pots lines for calls in a line hunt. There are no DID's, only the number for the pots line hunt group. I'am using a 4 digit dial plan. What do i have to configure to strip the last 4 digits and send it to unity express for the AA? I already have a dial-peer for the 4 digits pointing to unity express. Do I need to perform a number translation rule to truncate it down to 4 digits, or use a dial-plan? Thanks

Brandon Buffin · ‎03-24-2009

You can configure the following. This example uses 1234 for the AA DN.

voice-port 0/1/0

connection plar 1234

voice-port 0/1/1

connection plar 1234

Hope this helps.

Brandon

steigja · ‎03-24-2009

Brandon,

so what will happen here is when the voice-port comes up to recieve a call it will automatically dial my AA extension? What about outgoing calls such a 911 or, this won't have an effect on them right? It's only incoming. I believe my outgoing dial-peers are all correct. Thanks

Jason

Brandon Buffin · ‎03-24-2009

Jason,

That is correct. No effect on outgoing calls.

Brandon