snmp-server enable traps syslog doesn't send all syslog messages in traps

Unanswered Question
Mar 25th, 2009

Below are the syslog/console messages and trap messages.

The DTP is logged, but the trap version of the syslog message is not. Any suggestions?

Cat 6500 (IOS 122-18.SXF7)

enterprises.9.9.41.1.2.3.1.5.41 = "Interface GigabitEthernet1/23, changed state to up"

enterprises.9.9.41.1.2.3.1.5.42 = "Line protocol on Interface GigabitEthernet1/23, changed state to up"

enterprises.9.9.41.1.2.3.1.5.43 = "Configured from console by mark onvty1 (10.3.144.22)"

%LINK-3-UPDOWN: Interface GigabitEthernet1/23, changed state to up

%LINK-SP-3-UPDOWN: Interface GigabitEthernet1/23, changed state to up

%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/23, changed state to up

%LINEPROTO-SP-5-UPDOWN: Line protocol on Interface GigabitEthernet1/23, changed state to up

%DTP-SP-5-TRUNKPORTON: Port Gi1/23 has become dot1q trunk

%SYS-5-CONFIG_I: Configured from console by mark onvty1 (10.3.144.22)

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.5 (2 ratings)
Loading.
Joe Clarke Wed, 03/25/2009 - 10:14

This message is coming from the SP, and thus not sent as syslog traps. There is a feature request for this, CSCsf19672. Unfortunately, there is no ETA on an implementation.

Joe Clarke Wed, 04/01/2009 - 17:00

Just in the aforementioned bug as far as I've been able to tell.

Actions

This Discussion