03-25-2009 03:08 AM
Below are the syslog/console messages and trap messages.
The DTP is logged, but the trap version of the syslog message is not. Any suggestions?
Cat 6500 (IOS 122-18.SXF7)
enterprises.9.9.41.1.2.3.1.5.41 = "Interface GigabitEthernet1/23, changed state to up"
enterprises.9.9.41.1.2.3.1.5.42 = "Line protocol on Interface GigabitEthernet1/23, changed state to up"
enterprises.9.9.41.1.2.3.1.5.43 = "Configured from console by mark onvty1 (10.3.144.22)"
%LINK-3-UPDOWN: Interface GigabitEthernet1/23, changed state to up
%LINK-SP-3-UPDOWN: Interface GigabitEthernet1/23, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet1/23, changed state to up
%LINEPROTO-SP-5-UPDOWN: Line protocol on Interface GigabitEthernet1/23, changed state to up
%DTP-SP-5-TRUNKPORTON: Port Gi1/23 has become dot1q trunk
%SYS-5-CONFIG_I: Configured from console by mark onvty1 (10.3.144.22)
03-25-2009 10:14 AM
This message is coming from the SP, and thus not sent as syslog traps. There is a feature request for this, CSCsf19672. Unfortunately, there is no ETA on an implementation.
04-01-2009 04:46 PM
thanks for the feedback. Is that documented anywhere?
04-01-2009 05:00 PM
Just in the aforementioned bug as far as I've been able to tell.
04-01-2009 05:04 PM
Hi Joe, OK. Thanks for the followup.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide