upgrade controllers, seemed to create intermittent connectivity problems

Unanswered Question
Mar 25th, 2009

I was running version 4.2.130 on 3 wism blades. Actually one of the controllers in one wism is running a mesh code, so i did not upgrade it. Upgraded all except one (cause it won't upgrade, thats another battle) to 4.2.176.0. And now the controllers randomly go offline for just a few seconds, just long enough for the waps to disassociate. This probably happens twice a day, but it does not happen on the one that is still running 4.2.130.0 and the one that is running the mesh code. I'm not sure whats going on, I looked through the release notes to see if there was anything that may cause this, but I didn't see any red flags. Anyone have a clue as to what may be going on here? Any help would be appreciated.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode