Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

VG248 - Transient Connection - What is causing this?

Unanswered Question
Mar 25th, 2009
User Badges:

Our VG248 indicates an error in the CallManaegr Application Event Viewer. All 48 ports are registered in Call Manager so not sure why this is occuring.

Error: DeviceTransientConnection - Transient connection attempt.

Connecting Port: 0

Device name [Optional].:

Device IP address.: <Publsher>

Device type. [Optional]: 255

Reason Code [Optional].: 6

App ID: Cisco CallManager

Cluster ID: CM-Cluster

Node ID: <Subscriber>

Explanation: A connection was established and immediately dropped before completing registration. Incomplete registration may indicate a device is rehoming in the middle of registration. The alarm could also indicate a device misconfiguration, database error, or an illegal/unknown device trying to attempt a connection.

Recommended Action: No action is required if this event was issued as ...

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Jaime Valencia Wed, 03/25/2009 - 10:55
User Badges:
  • Cisco Employee,
  • Hall of Fame,


that is related to port 0 from vG248, configure it on CUCM and errors will disappear.



if this helps, please rate

paulcian_2 Wed, 03/25/2009 - 11:07
User Badges:

What is required to make the port configured? I am not using the Voice Mail integration so all I have on that port is the Device Pool and Calling Search Space.

Thanks for the reply.


This Discussion