I would like to be able to NAT a specific address from one private IP to another to help with a routing issue we can't get around and just wanted to verify that the config below will do what I am looking for?
access-list 101 permit ip host 192.168.1.6 host 172.16.0.1
route-map transStatic permit 10
match ip address 101
ip nat inside source static 192.168.1.6 172.16.0.1
ip nat inside
ip nat outside
What I want is to translate 192.168.100.6 -> 172.16.0.1. However, this is the ONLY thing I want translated. I do not want any other traffic to/from 192.168.100.6 being translated. If there are any other ways to do this I would be open to those also. Thanks!