Remove 411 Dialing from CME

Answered Question
Mar 25th, 2009
User Badges:

I have a CME installed and I wanted to know how to remove the outbound dialing of the 411 inforamtion number.


Thanks,

Correct Answer by Kenneth Mohammed about 8 years 1 month ago

Rudy,


Ok...forget all the translation stuff. I just tested this on my CME in the lab.


just do:


config t

telephony-service

after-hours block pattern 1 9411 7-24


Hope that helped, if so please rate.



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Kenneth Mohammed Wed, 03/25/2009 - 10:12
User Badges:
  • Silver, 250 points or more

Hello,


Try this,


config t

telephony-service

after-hours block pattern 1 411 7-24


Hope that helped, if so please rate.

rudy.lilly Wed, 03/25/2009 - 10:32
User Badges:

It applied successfully, but it still allows me to dial the number..?? I wrote to memory also..anything I'm missing?

rudy.lilly Wed, 03/25/2009 - 10:44
User Badges:

I think the problem is that I have this number configured as a dial-peer..??

dial-peer voice 9411 pots

destination-pattern 9411

port 0/0/0:23

forward-digits 3

Kenneth Mohammed Wed, 03/25/2009 - 11:43
User Badges:
  • Silver, 250 points or more

Hey Rudy,


I didn't realize it was you. Hows it going. Anyway, try this:


voice translation-rule 1

rule 1 reject /9411/


voice translation-profile reject411

translate called 1


dial-peer voice 9411 pots

translation-profile outgoing reject411

destination-pattern 9411

port 0/0/0:23


Hope that helped, if so please rate.



rudy.lilly Wed, 03/25/2009 - 11:54
User Badges:

Yes Ken it's me...How are you--I see ur still fighting the battles..anyway here's the results and I can still make the calls. What am I missing?

EMI-CME2851#config t

Enter configuration commands, one per line. End with CNTL/Z.

EMI-CME2851(config)#tele

EMI-CME2851(config)#telephony-service

EMI-CME2851(config-telephony)#voice translation-rule 1

EMI-CME2851(cfg-translation-rule)#rule 1 reject /9411/

EMI-CME2851(cfg-translation-rule)#

EMI-CME2851(cfg-translation-rule)#voice translation-profile reject411

EMI-CME2851(cfg-translation-profile)#translate called 1

EMI-CME2851(cfg-translation-profile)#

EMI-CME2851(cfg-translation-profile)#dial-peer voice 9411 pots

EMI-CME2851(config-dial-peer)#translation-profile outgoing reject411

EMI-CME2851(config-dial-peer)#destination-pattern 9411

EMI-CME2851(config-dial-peer)#port 0/0/0:23

EMI-CME2851(config-dial-peer)#end

Kenneth Mohammed Wed, 03/25/2009 - 12:00
User Badges:
  • Silver, 250 points or more

Can you do a debug voip dialpeer while making the call and post the output here, there may be another dialpeer that is allowing you to make the call.

rudy.lilly Wed, 03/25/2009 - 12:07
User Badges:

There was another...

1: Dial-peer Tag=9411

2: Dial-peer Tag=411

026147: Mar 25 15:07:40.619 NewYork: //-1/698D63D59F48/DPM/dpMatchPeersCore:

Calling Number=, Called Number=9411, Peer Info Type=DIALPEER_INFO_SPEECH

026148: Mar 25 15:07:40.619 NewYork: //-1/698D63D59F48/DPM/dpMatchPeersCore:

Match Rule=DP_MATCH_DEST; Called Number=9411

026149: Mar 25 15:07:40.619 NewYork: //-1/698D63D59F48/DPM/dpMatchPeersCore:

Result=Success(0) after DP_MATCH_DEST

026150: Mar 25 15:07:40.619 NewYork: //-1/698D63D59F48/DPM/dpMatchPeersMoreArg:

Result=SUCCESS(0)

List of Matched Outgoing Dial-peer(s):

1: Dial-peer Tag=411

2: Dial-peer Tag=9411

Correct Answer
Kenneth Mohammed Wed, 03/25/2009 - 12:11
User Badges:
  • Silver, 250 points or more

Rudy,


Ok...forget all the translation stuff. I just tested this on my CME in the lab.


just do:


config t

telephony-service

after-hours block pattern 1 9411 7-24


Hope that helped, if so please rate.



rudy.lilly Wed, 03/25/2009 - 12:15
User Badges:

Wonderful!!! That was it the first time, but you didn't know the peer was setup using a 9...THanks for your help as always and it was good talking with you again.


Thanks,

Kenneth Mohammed Wed, 03/25/2009 - 12:18
User Badges:
  • Silver, 250 points or more

Glad that worked and sorry for the runaround...I had to find a CME to test on.


Hope that helped, if so please rate.

Actions

This Discussion