03-25-2009 11:06 AM - edited 07-03-2021 05:22 PM
Hi guys,
can i use version 5.2.178 on my controller and 4.2.110 on my wcs?
Better:
have WLC and WCS to run the same main version (4.2 and 4.2,5.2 and 5.2) or are the wlc and wcs version not related?
(5.2 and 4.2)
thx...
Solved! Go to Solution.
03-25-2009 11:10 AM
You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.
03-25-2009 11:10 AM
You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.
03-26-2009 05:19 AM
Hey Guys,
I have WLC 5.0.148.0 i'm trying to add controller to WCS 4.1.83.0 but getting errors.
Should this work or do I need to upgrade WCS to 5.0 or 5.2?
03-26-2009 05:57 AM
Hi Eoin,
The WCS needs to be at an equal or higher level than the WLC. You would need Cisco Wireless Control System (WCS) software release 5.0.55.0 as a minimum supported version;
http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn5014x0mr1.html
Hope this helps!
Rob
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: