Solved: WLC vs WCS version

alessandro.dona · ‎03-25-2009

Hi guys,

can i use version 5.2.178 on my controller and 4.2.110 on my wcs?

Better:

have WLC and WCS to run the same main version (4.2 and 4.2,5.2 and 5.2) or are the wlc and wcs version not related?

(5.2 and 4.2)

thx...

Pari Thiagasundaram · ‎03-25-2009

You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.

View solution in original post

Pari Thiagasundaram · ‎03-25-2009

You need to upgrade your WCS to 5.2.130 for you to administer WLC running 5.2.178 or have 4.2.176 on your controller with your existing version of WCS.

eoinwhite · ‎03-26-2009

Hey Guys,

I have WLC 5.0.148.0 i'm trying to add controller to WCS 4.1.83.0 but getting errors.

Should this work or do I need to upgrade WCS to 5.0 or 5.2?

Rob Huffman · ‎03-26-2009

Hi Eoin,

The WCS needs to be at an equal or higher level than the WLC. You would need Cisco Wireless Control System (WCS) software release 5.0.55.0 as a minimum supported version;

http://www.cisco.com/en/US/docs/wireless/controller/release/notes/crn5014x0mr1.html

Hope this helps!

Rob