03-25-2009 05:32 PM - edited 03-06-2019 04:49 AM
Greetings, I have a 350 card that I had directly linking to a cable, then antenna, for Internet. Recently I got a new computer with Windows Vista and placed the board and card into it. Vista asked for drivers for the new device. Where can I get the driver or is this card compatible? If not what can I do that is similar?
03-25-2009 06:05 PM
CAB350 wireless card?
03-26-2009 03:02 PM
It is an AIR-LMC350 Series 2.4 GHz DS 11 Mbps Wireless Lan Module. Cisco Aironet 350 Series. The back of the card also says AIR-LMC352.
03-26-2009 03:35 PM
Hi Trent,
Unfortunately Vista is not supported.
I guess it's because this model is already End-of-Sale/End-of-Life. Cisco's encouraging users to upgrade to the next card. However, for future proofing, Cisco might be quietly developing the next generation of cards with Draft N 2.0. So stay tuned.
03-27-2009 11:13 AM
Thanks for all the help so far. What card could I buy that would function the same way as the 350, but work with Vista? Or: If I bought and installed Windows XP then would the 350 card work? Thanks again.
03-27-2009 11:39 AM
Leo, it is not officially supported, but it works with some restrictions.
03-27-2009 05:23 PM
Hi Trent,
According to the previous comment, it should work and I'm curious to find out.
Unless you really need a replacement, the CAB21 can do a/b/g but NOT N.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: