I have setup WEBVPN with the SSL client on a Cisco 2811. The WebVPN gateway is via a loopback address on the router, so I NAT port 443 to this address as it enters the ADSL interface.
Everything works great apart from when I try to access an internal address on the router itself (such as the internal LAN 192.168.0.1).
If I try to telnet to this address I connect but then spurious characters appear and the session hangs. I also cannot access the CME web pages via this address.
I have tried disabling CEF to see if some weird internal issue is the problem but that did not fix it.
Anyone else experienced this?