Port Channel Physical Requirements

Unanswered Question
Mar 26th, 2009

I'm working on a MAN project. The client has 3560s at the remote location and 6500s at the Hubs. The Fiber runs in a ring from each individual location back to one of the hub sites. So, the 3560 may have an LX GBIC in one port and a ZX GBIC in the other, based on the distance from the hub site going east and west.

My question is; Can I port channel these two Gigabit ports and if I do, will I see errors based on the fistance difference?


Thanks

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Edison Ortiz Thu, 03/26/2009 - 08:25

My question is; Can I port channel these two Gigabit ports


You should be able to, as long as the port configuration is the same.


and if I do, will I see errors based on the distance difference?


No.



HTH,


__


Edison.

Actions

This Discussion