Dial Peers and Digit Manipulation

Unanswered Question
Mar 26th, 2009
User Badges:

What is the order of operations on dial peers that use digit manipulation and voice translation profiles?


I'm studying from the CVOICE book, Third Edition by Kevin Wallace. I think there is a ton of errata in here but the errata hasn't been updated it seems.


I'm concerned with when dial peers are matched, both inbound and outbound, versus when the digit manipulation is applied, either through basic digit manipulation or voice translation profiles.


Thanks for any help you can provide.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Marwan ALshawi Thu, 03/26/2009 - 15:03
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

inbound pots>> port-translation profile> numberexpansion after DP match CLID and dial-peer teranslation profile


voip inbound >>global translation-profile>>num exapnsion >>after DP match>> CLID >>DP translation-profile


pots outbound>>DP translation>>CLID>>prefix-digits/forwad-digits


voip outbound>>DP translation>>CLID


good luck

if helps Rate

b.gamble Thu, 03/26/2009 - 16:17
User Badges:

Ok, I think I know where I was getting confused.


There are translation profiles bound at both the port and dial-peer level. Is that correct?

Marwan ALshawi Thu, 03/26/2009 - 17:24
User Badges:
  • Purple, 4500 points or more
  • Community Spotlight Award,

    Best Publication, December 2015

yes,

for inbound the port will be processed first


HTH

Actions

This Discussion