Routing Problem

Unanswered Question
Mar 27th, 2009
User Badges:

Hi,

We are using cisco 3845 Router and have two redundant links. Interface Serial 2/0 has the first priority to send data . I have blocked “Host A” on Serial 2/0 , But other one interface (Serial 2/1) is opened for the particular host. But the host is not getting response from out of it's network. (Host can't reach to the destination)we are using OSPF Routing protocol.



Please Go Through Attached Diagram



Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Giuseppe Larosa Fri, 03/27/2009 - 01:07
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Jayesh,

is OSPF running on both serial links ?


with

>> have blocked “Host A” on Serial 2/0


means you have done a PBR rule to route packets with source = HostA to be routed out ser2/0 ?

or that you have made an ACL blocking that specific host out/in ser2/0 ?



I would suggest you to provide a filtered version of your configuration with the interesting parts


Hope to help

Giuseppe


Jayesh Prajapati Fri, 03/27/2009 - 01:18
User Badges:

hii,


YEs On Both Link OSPF Runnig ..

and

We are appled Standered access List in Router HAST A to be Routed out Se2/0..

Giuseppe Larosa Fri, 03/27/2009 - 01:34
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    Founding Member

Hello Jayesh,


so you are using PBR to send the packet with source hostA out ser2/0 ?


but what about the return path is only made with OSPF or there is a PBR also there ?


Hope to help

Giuseppe


Actions

This Discussion