×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Inter-vlan-routing ???????

Unanswered Question
Mar 27th, 2009
User Badges:

Hi


i am facing problem on intervlan routing.


i have 2 vlan for depart marketing vlan 10 & account vlan 20.


On router i have define 2 sub interfaces


F0/0.1 with encapsulation dotq1 ip add 192.168.1.254/24 (market...)


F0/0.2 with encapsulation dotq1 ip add 192.168.2.254/24 (accout...)


On switches VTP server MOde default.


between router & sw-1 , on sw-1 i have define connected port as trunk... same Sw-1 to Sw-2 all connected ports are trunk ports same as for sw2 to sw-3 all connected ports are TRUNK mode.


I have define Vlan 10& 20 on Sw-2 & Sw-3 all switches.. and for test purpose on Sw-3 i have assiged 1 port to PC vlan 10 to test the connectivty ip is 192.168.1.1/24 to ping the gatway 192.168.1.254/24 but it not responding.


kindly suggest me what shouldi do ...


thanks






  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Fri, 03/27/2009 - 04:37
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Please post


1) output of "sh interface trunk" from sw1


2) "sh run" from router


Jon

Actions

This Discussion