Two BR1310 on each side

Unanswered Question
Mar 27th, 2009

Hello,

I'd like to install two BR1310 on each side to douple the speed. Is that possible? Do I need a router to handle that? Maybe a white paper to that topic exists?

Greetings,

Rouven

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
jeff.kish Fri, 03/27/2009 - 09:33

Hi Rouven,

Bridges create a simple L2 link, so think of these two links as being nothing more than long Ethernet cables. When you plug the two "cables" into their switches, you'll create a network loop. So you have two options:

1. Allow Spanning-Tree to block the loop

2. Configure Etherchannel on the switches to bond the two links

Take a look here for some good Etherchannel documentation: https://www.cisco.com/en/US/tech/tk389/tk213/tsd_technology_support_protocol_home.html

I hope this helps.

Jeff

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode