Are there any snmp mibs for the queueing counters in 6500?

Unanswered Question
Mar 27th, 2009
User Badges:

If you do a "sh queueing int gx/x" on a 6500 IOS box, you get a bunch of info on the queue of that particular port. At the bottom of the display are counters for dropped packets in the various queues for tx and rx as shown here:


Packets dropped on Transmit:

BPDU packets: 0


queue thresh dropped [cos-map]

---------------------------------------------------

1 1 629939 [0 1 ]

1 2 0 [2 3 ]

2 1 0 [4 6 ]

2 2 0* [7 ]

3 1 0* [5 ]

* - shared transmit counter


Packets dropped on Receive:

BPDU packets: 0


queue thresh dropped [cos-map]

---------------------------------------------------

1 1 310142 [0 1 2 3 4 5 6 7 ]


This output shows queue 1 threshold 1 has dropped 629939 packets on transmit, and 310142 packets dropped on the receive side.


Is there an SNMP mib that refers to the drop counters so that our network management platform can be alerted when drops occur?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Laurent Aubert Fri, 03/27/2009 - 18:52
User Badges:
  • Cisco Employee,

Hi,


I think you need CISCO-SWITCH-QOS-MIB but it requires 12.2(33)SXH minimum.


HTH


Laurent.

Actions

This Discussion