2801, VWIC2 t1 & best configuration

Unanswered Question
Mar 27th, 2009
User Badges:

I'm setting up my 1st Cisco router: a 2801 & 1 port VWIC2 t1 card. The t1 is also different from the rest of our point-to-point t1s. It only has channels 9-24. Checking configs I saw the channel-group command. Someone told me this is only to be used with CAS t1s and I need to know if the t1 is CAS or PRI. I thought PRI is only voice? I need this for data. I also thought if channel 24 is in use then it cannot be PRI. I called the telco who were little help. How can I know what type of PRI I have and where can I find the best documentation for setting this up?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
paolo bevilacqua Fri, 03/27/2009 - 12:01
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    Founding Member

You do not have PRI.

Just configure channel-group timeslots 9-24.


thotsaphon Fri, 03/27/2009 - 12:07
User Badges:
  • Gold, 750 points or more

Umber,

As Poalo stated, You need not configure pri-group in your case.

In short, VWIC stands for Voice Wan Interface Cards. So you can use for either data or voice. Channel-group commands for data traffic. Pri-group commands for voice traffic. Yes. You will lose one time-slot for signaling when using PRI.



HTH,

Toshi

Actions

This Discussion