Static NAT problem

Answered Question
Mar 27th, 2009
User Badges:
  • Purple, 4500 points or more

All,


I have a problem in that I have multiple IP addresses that get redirected to the same internal host.....on the same port.


I can't do:


static (dmz1,outside) x.x.x.x x.x.x.x netmask x.x.x.x


And I can't do:


static (dmz1,outside) tcp x.x.x.x port x.x.x.x port netmask 255.255.255.255


Can I do anything for this?


Thanks,

John

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (2 ratings)
Loading.
Jon Marshall Fri, 03/27/2009 - 15:21
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

John


I don't think you can do this with the ASA. If the source addresses were different depending on the public IP address being accessed then you could do something but if this isn't the case i don't think the ASA will let you configure this.


Jon

Jon Marshall Fri, 03/27/2009 - 23:20
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Vikram


Many thanks for this. I was involved in that post too so i should have remembered :-)


John


Apologies, totally forgot about that post, your memory goes as you get older :-).


Jon

John Blakley Sat, 03/28/2009 - 04:35
User Badges:
  • Purple, 4500 points or more

Jon,


I submitted a tac case yesterday, and they said that it was impossible.


I just tested this on my ASA at the house, and it works great. =)


Thanks Jon and Vikram!

John

Actions

This Discussion