03-27-2009 02:43 PM - edited 03-11-2019 08:11 AM
All,
I have a problem in that I have multiple IP addresses that get redirected to the same internal host.....on the same port.
I can't do:
static (dmz1,outside) x.x.x.x x.x.x.x netmask x.x.x.x
And I can't do:
static (dmz1,outside) tcp x.x.x.x port x.x.x.x port netmask 255.255.255.255
Can I do anything for this?
Thanks,
John
Solved! Go to Solution.
03-27-2009 07:11 PM
03-27-2009 03:21 PM
John
I don't think you can do this with the ASA. If the source addresses were different depending on the public IP address being accessed then you could do something but if this isn't the case i don't think the ASA will let you configure this.
Jon
03-27-2009 07:11 PM
03-27-2009 11:20 PM
Vikram
Many thanks for this. I was involved in that post too so i should have remembered :-)
John
Apologies, totally forgot about that post, your memory goes as you get older :-).
Jon
03-27-2009 11:41 PM
no worries JON, we all make mistakes :).
03-28-2009 04:35 AM
Jon,
I submitted a tac case yesterday, and they said that it was impossible.
I just tested this on my ASA at the house, and it works great. =)
Thanks Jon and Vikram!
John
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: