Can't dial long distance. UC520 accepts 10 digits only

Answered Question
Mar 28th, 2009
User Badges:

Recently set up a UC520. Can call out if the number is local (ie. 10 digits). As soon as you dial a number with a 1 first, the call fails. The display on the phone only shows the first 10 digits dialed. It appears to be truncating the last digit so the call fails. I am not on site, but I do have the full config printed out. WOuld appreciate any help.

Hi,

Look at the dial-peer voice ## pots.

Are the FXO lines Centrex?

If so,

dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits 12
prefix 9
no sip-register


If not,

dial-peer voice 73 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits 11
no sip-register


Hope this helps.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer

Hi,

Look at the dial-peer voice ## pots.

Are the FXO lines Centrex?

If so,

dial-peer voice 63 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits 12
prefix 9
no sip-register


If not,

dial-peer voice 73 pots
trunkgroup ALL_FXO
corlist outgoing call-national
description **CCA*North American*Long Distance**
translation-profile outgoing OUTGOING_TRANSLATION_PROFILE
preference 5
destination-pattern 91[2-9]..[2-9]......
forward-digits 11
no sip-register


Hope this helps.

Actions

This Discussion