Stopping 6506 CatOS Auto Reboot

Unanswered Question
Mar 30th, 2009

I have a Cat6506 running CatOS with Sup720. The supervisory modules keeps on rebooting (see attachment). How can I break out of this? Thanks in advance.

Attachment: 
I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
glen.grant Mon, 03/30/2009 - 05:08

I would call the TAC if it is happening continuosly. It's either a supervisor or memory problem and would probably have to be replaced.

Leo Laohoo Mon, 03/30/2009 - 14:52

Hi David,

You can go to ROMmon but I doubt if you can do anything to fix the blade.

You need to contact Cisco TAC and get the blade RMA-ed because it has totally (and utterly) failed. Based on the following error messages:

SysAD Parity Error Exception occurred on Mar 30 2009 06:53:22

Nested exception occured

*** Mistral Interrupt on line 2 ***

IO bus interrupt due to illegal addr, no ack, etc

PC = 0xbfc12a04, Cause = 0x1000, Status Reg = 0x30419003

ROM Monitor Can Not Recover From Exception

A Board Reset Is Issued

*** Mistral Interrupt on line 2 ***

Address trap interrupt ..

PC = 0xbfc278bc, Cause = 0x80001000, Status Reg = 0x30419003

ROM Monitor Can Not Recover From Exception

A Board Reset Is Issued

Cat6k-Sup720/SP processor with 524288 Kbytes of main memory

Actions

This Discussion