Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
859
Views
0
Helpful
5
Replies

cisco router 800 series

ssweehin
Level 1
Level 1

‎03-30-2009 07:56 AM - edited ‎03-04-2019 04:09 AM

I reseted the cisco router 800 series. All the configuration gone. May i know how to configure its ip back to 10.10.10.1? Thus, I can use SDM to configure the rest of settings.

I tried to configure its interface ip to 10.10.10.1 but it showed ip address may not be configured on L2 links.

Please kindly help.

Labels:
0 Helpful
5 Replies 5

John Blakley
VIP Alumni
VIP Alumni

‎03-30-2009 08:07 AM

You should be able to configure the address on interface BVI1.

HTH,

John

HTH, John *** Please rate all useful posts ***
0 Helpful

ssweehin
Level 1
Level 1
In response to John Blakley

‎03-30-2009 08:10 AM

how to do it?

0 Helpful

John Blakley
VIP Alumni
VIP Alumni
In response to ssweehin

‎03-30-2009 08:17 AM

You would need to console into the device with your console cable. You can use hyperterminal or putty to connect to the device.

HTH,

John

HTH, John *** Please rate all useful posts ***
0 Helpful

ssweehin
Level 1
Level 1
In response to John Blakley

‎03-30-2009 11:40 AM

What is the command?

0 Helpful

John Blakley
VIP Alumni
VIP Alumni
In response to ssweehin

‎03-30-2009 11:43 AM

The command for setting your ip address?

conf t

int bvi1

ip addr 10.10.10.1 255.255.255.0

Copy and paste the lines that are between and and paste them into your hyperterminal window.

HTH, John *** Please rate all useful posts ***
0 Helpful
Customers Also Viewed These Support Documents
Review Cisco Networking products for a $25 gift card