SANTap Configuration

davidhurd · ‎03-30-2009

Looking for docs on setting up SANTap on SAN OS 3.1.3a

Michael Brown · ‎03-30-2009

This link is for 4.1 code....not sure how much has changed since 3.1

http://cisco.com/en/US/docs/switches/datacenter/mds9000/sw/4_1/santap/configuration/guide/SANTap.html

All I see for SSM in the 3.0 documentation is the Install and Upgrade Guide.

Here's the link on CCO to all the docs.

http://cisco.com/en/US/products/ps5989/products_installation_and_configuration_guides_list.html

Hope this helps,

Mike

davidhurd · ‎03-31-2009

Thanks for the info, though I already had those, which is why I asked about 3.1 specifically as there are SANTap limits which are unique by level of SSI. Thx anyway

Michael Brown · ‎03-31-2009

The only thing I can locate specific to 3.x for SAN TAP config is a chapter in the 3.x configuration guide. There are some notes in the chapter that detail what the limits are in some version of 3.x code.

http://cisco.com/en/US/docs/storage/san_switches/mds9000/sw/rel_3_x/configuration/guides/cli_3_3/cstap.html

-Mike