VPN client connects to ASA but cannot access internal network!

Answered Question
Mar 31st, 2009
User Badges:

Hi, any help will be appreciated.

I just got a Cisco ASA 5505 and configured for VPN. I can connect from a remote location using the VPN client, but cannot route any packets! Also my local access to the internet gets disconnected. What do I need to fix this? split-tunnel config?

Current config is attached.

thanks





Correct Answer by acomiskey about 8 years 4 weeks ago

Add this for your first issue...


crypto isakmp nat-traversal


Then you can configure split tunneling for local internet access.


http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080702999.shtml


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
eadames Wed, 04/01/2009 - 04:22
User Badges:

Thanks, you were right on the mark!


Added the crypto isakmp nat-traversal command and configured split tunneling, is working fine now, thanks a lot for your help.

Actions

This Discussion