Pix 550- adding rule

Unanswered Question
Apr 1st, 2009
User Badges:

I have a pix 550 (6.3). I need to nat a server on my lan to the internet. The server ip needs to be natted to 65.333.333.3 and be allowed www access only.

Need assistance with the configuration rules I need to allow on pix.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
JamesLuther Wed, 04/01/2009 - 06:35
User Badges:
  • Silver, 250 points or more


Your IP address is invaild as the second and thrird actet exceed 255, however I'm assuming this is just an example?

Anyway, your configuration will be.

static (inside,outside) 65.333.333.3 netmask

access-list in_on_outside permit tcp any host 65.333.333.3 eq 80

Assuming the IP is behind the "inside" interface and also there is an ACL called "in_on_outside" attached to the outside interface (access-group command)

So please adjust these parameters to your config.



This Discussion