UPC<UserID> Invaild Characters

Unanswered Question
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Dennis Mink Thu, 04/09/2009 - 16:18

that is it, you can only enter CAPS.

Cisco explicitly specify this:

tep 1 Choose Device > Phone.

Step 2 In the Find and List Phones window, click Add New.

Step 3 In the Add a New Phone window, in the Phone Type drop-down list, select Cisco Unified Personal Communicator, and click Next.

Step 4 In the Phone Configuration window, in the Device Information section, perform these steps:

a. In the Device Name field, specify the soft-phone device name according to these guidelines:

-It must match the user name.

-It must start with UPC.

-It must contain the letters A through Z and numerals 0 through 9, ignoring all other characters.

-It can contain 12 additional characters after UPC.

See Table 2-3 for examples.


gogasca Tue, 04/21/2009 - 02:43

check this: CSCsx97062

Its a problem with naming convention.

There are two ES posted to CCO.

The current ES release is

this one contain the fix for ddts since its cumulative, i mean previous Es contains this fix.


This Discussion