04-01-2009 12:25 PM
Okay. I have a cisco 4006 that runs set based commands.. I have no idea how I configure snmp on it. Can someone help me with this?
unlike the IOS i just go...
snmp-server community public RO
snmp-server communtiy private RW
but how do I do this in a set based system?
Solved! Go to Solution.
04-01-2009 12:46 PM
That's running CatOS then:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml
set snmp community read-only public
set snmp community read-write private
The "command ?" online help is also available.
04-01-2009 12:52 PM
these are the commands:
set snmp community read-only
set snmp community read-write
have a look at these docs:
04-01-2009 12:46 PM
That's running CatOS then:
http://www.cisco.com/en/US/tech/tk648/tk362/technologies_tech_note09186a0080094aa4.shtml
set snmp community read-only public
set snmp community read-write private
The "command ?" online help is also available.
04-01-2009 12:52 PM
these are the commands:
set snmp community read-only
set snmp community read-write
have a look at these docs:
04-01-2009 12:54 PM
ah.. boss helped me got it now.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide