Active/Passive NAT 1841

Unanswered Question
Apr 1st, 2009
User Badges:

Ok here is my scenario. We have a remote router that has a static nat that points to a server in datacenter1. We now have datacenter2 with a clone server. Basically I am trying to get CSS functionality out of our 1841 except I just want Active/Passive. Does anyone know of any way to do this without purchasing true load balancers?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Wed, 04/01/2009 - 13:27
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

Michael


The only thing that occurs is to use something along the lines of EEM where you can run a script on the router that checks the availability of the remote device and if down can then run certain commands on the router ie. change the NAT translation.


I would recommend posting this query into Network Management where there is a Cisco expert, J. Clarke, who is experienced in EEM and could tell you if this is a workable solution.


Jon

Actions

This Discussion