assigning IP address using DHCP server to client in several vlan

Unanswered Question
Apr 1st, 2009

Hi all,

I'm having difficulty about IP address assignment. I have 2 vlan which is VLAN 1 and VLAN 100. My DHCP server is in VLAN 1. I have 2 pc which is reside in VLAN 1 and VLAN 100. My PC in VLAN 1 able to get ip from DHCP server, but my PC in VLAN 100 can't get ip from DHCP server. Below is my current configuration:

CORE Switch configuration:

!

ip routing

!

vlan 100

!

interface Vlan1

ip address 192.168.1.220 255.255.255.0

no ip mroute-cache

no clns route-cache

!

interface Vlan100

description *** int vlan 100 ***

ip address 192.168.100.1 255.255.255.0

ip helper-address 192.168.1.210

no clns route-cache

!

interface FastEthernet1/0/15

description ** to 2900 fa 0/2 trunk ***

switchport trunk encapsulation dot1q

switchport mode trunk

switchport nonegotiate

load-interval 30

!

ACCESS Switch configuration:

!

interface FastEthernet0/2

switchport trunk encapsulation dot1q

switchport mode trunk

!

interface FastEthernet0/17

spanning-tree portfast

!

interface FastEthernet0/18

switchport access vlan 100

spanning-tree portfast

!

interface VLAN1

ip address 192.168.1.158 255.255.255.0

no ip directed-broadcast

no ip route-cache

!

My first PC connected to int fa 0/17 able to get ip from DHCP server, but my second PC connected to int fa 0/18 unable to get ip from DHCP server. Is there any missing configuration that I should add into CORE switch or ACCESS switch ?

Thank in advance.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Istvan_Rabai Thu, 04/02/2009 - 00:55

Hi,

Have you defined an address pool in the DHCP server for network 192.168.100.0/24 ?

Istvan

Actions

This Discussion