Register PRI via SIP

Unanswered Question
Apr 1st, 2009


There is Cisco Voice GW w x1 PRI.

Is it possible to register PRI b-channels/d-channel on the SIP-server like FXS lines can be ?


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Nicholas Matthews Thu, 04/02/2009 - 09:45

In SIP, you register numbers with an authentication/password. There's nothing specific to the type of card.

If you have a POTS dial peer with no wildcards in the destination-pattern (like you might with a FXS line) it will register that number.

In your POTS dial peer you would just want to create a new dial peer for each number you want to register.



This Discussion