Issue in configuring the QOS on GRE/IPSEC Tunnel

Unanswered Question
Apr 2nd, 2009

Hi,

My issue:

On WAN we need to give priority some traffic (say RDP and

voice ) and other default traffic should not be prioritized


When I apply the service policy on the tunnel. I get the

below error.

PDM_CORP_MPLS_RTR01(config-if)#service-policy output

tunnel_115_COCHIN I/f

shape class CLASS_PROJ_BDCAST_COCHIN requested bandwidth

600 (kbps),

available only 100 (kbps) I/f shape class CLASS_COCHIN_RDP

requested

bandwidth 2600 (kbps), available only 100 (kbps) I/f shape

class

CLASS_PROJ_BDCAST_COCHIN requested bandwidth 600 (kbps),

available only 100

(kbps) PDM_CORP_MPLS_RTR01(config-if)#


interface Tunnel116

description << SILUGURI to PDM GRE/IPSEC TUNNEL >>

ip address 10.60.254.2 255.255.255.252

ip tcp adjust-mss 1350

keepalive 1 3

tunnel source 10.60.255.111

tunnel destination 10.60.255.116

tunnel mode ipsec ipv4

tunnel protection ipsec profile SILUGURI_PDM_VPN

service-policy output tunnel_116_SILUGURI

we are doing in Router 3825

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

Actions

This Discussion