Hi,
My issue:
On WAN we need to give priority some traffic (say RDP and
voice ) and other default traffic should not be prioritized
When I apply the service policy on the tunnel. I get the
below error.
PDM_CORP_MPLS_RTR01(config-if)#service-policy output
tunnel_115_COCHIN I/f
shape class CLASS_PROJ_BDCAST_COCHIN requested bandwidth
600 (kbps),
available only 100 (kbps) I/f shape class CLASS_COCHIN_RDP
requested
bandwidth 2600 (kbps), available only 100 (kbps) I/f shape
class
CLASS_PROJ_BDCAST_COCHIN requested bandwidth 600 (kbps),
available only 100
(kbps) PDM_CORP_MPLS_RTR01(config-if)#
interface Tunnel116
description << SILUGURI to PDM GRE/IPSEC TUNNEL >>
ip address 10.60.254.2 255.255.255.252
ip tcp adjust-mss 1350
keepalive 1 3
tunnel source 10.60.255.111
tunnel destination 10.60.255.116
tunnel mode ipsec ipv4
tunnel protection ipsec profile SILUGURI_PDM_VPN
service-policy output tunnel_116_SILUGURI
we are doing in Router 3825