04-02-2009 05:57 AM - edited 03-06-2019 04:57 AM
We have a trunk link which we use to connect two sites. We have numerous non routed vlans which are running across the trunk. I need to create a qos policy which will give the traffic from one particular vlan priority over everything else. I'm not sure what method I should be using to classify the traffic. Should I use mac-addresses rather than ip addresses as the traffic will be switched or is there a way to classify a particular vlan. Any help greatly appreciated.
04-02-2009 07:27 AM
Darren
What switch type are you using ?
Jon
04-02-2009 07:30 AM
WS-3750G
04-02-2009 07:33 AM
04-02-2009 07:51 AM
I thought you could match on VLAN, but it's only supported on the 10000 series.
http://www.cisco.com/en/US/docs/ios/12_2sb/feature/guide/ht_mVLAN.html
If you apply a policy map to a trunk port, will it really work? I can't lab it up, but it's very interesting.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide