Hi there Adrian,
That's worked a charm for the Windows servers, but when I run the snmp commands on the ccm cli I get no response, but the server promises me it's running snmp:-
admin:utils snmp walk 2c public 127.0.0.1 .1.3.6.1.4.1.232.2.2.2.1.0
This command may temporarily impact CPU performance.
Continue (y/n)?y
Failed :
Timeout: No Response from 127.0.0.1
Executed command unsuccessfully
admin:
admin:
admin:utils snmp test
Service Manager is running
Test SNMP Trap starts with Local Host Name, Specify a Remote Sever Name to test Remote Syslog
Message from syslogd@publisher at Thu Apr 2 16:15:03 2009 ...
publisher local7 0 : 1: Apr 02 15:15:03.8 UTC : %CCM_CALLMANAGER-TESTALARMCATALOG-0-TestAlarmEmergency: Testing EMERGENCY_ALARM App ID:Cisco CallManager Cluster ID: Node ID:publisher
Message from syslogd@127.0.0.1 at Thu Apr 2 16:15:03 2009 ...
127.0.0.1 local7 0 1: Apr 02 15:15:03.8 UTC : %CCM_CALLMANAGER-TESTALARMCATALOG-0-TestAlarmEmergency: Testing EMERGENCY_ALARM App ID:Cisco CallManager Cluster ID: Node ID:publisher
TestAlarmInformational sent [Returncode=0]
TestAlarmEmergency sent [Returncode=0]
TestAlarmAlert sent [returncode=0]
TestAlarmCritical sent [Returncode=0]
TestAlarmDebug sent [Returncode=0]
TestAlarmNotice sent [Returncode=0]
TestAlarmWarning sent [Returncode=0]
TestAlarmError sent [Returncode=0]
admin:
Any thoughts?
LH
