detail port usage report on LMS

Answered Question
Apr 2nd, 2009
User Badges:

how I can generate and schedule a report for detail port usage/capabilities like if the port is 10/100/100 on switches.

Correct Answer by Joe Clarke about 8 years 3 weeks ago

In LMS 3.1, the Campus Manager Port Attributes report is now schedulable, and exportable. This provides much of the data you want.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Joe Clarke Thu, 04/02/2009 - 16:22
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

What version of LMS?

eliaspaulos Fri, 04/03/2009 - 06:50
User Badges:

oh ..sorry! LMS 2.6 what I am trying to do is to report for different groups owns different switch. to report them like there switch status including port, server mac address, server ip addresses, server name, port speed setting, port duplex setting, actual speed, actual duplex, vlan and trunking information. it's looks like a combination of end host report + switch report.any suggestion for my objective.



eliaspaulos Fri, 04/03/2009 - 08:23
User Badges:

sorry!!! my statement was wrong actually in simple word I want a the report equivalent output of " sh interface status"

how I can meet my objective on LMS 2.6

Joe Clarke Fri, 04/03/2009 - 09:27
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

The best thing to do for LMS 2.6 is Netshow. Just schedule a Netshow job to run "show interface status", then look at the results. These results can also be exported and printed. Netshow can be found under RME > Tools > NetShow.

eliaspaulos Fri, 04/03/2009 - 09:48
User Badges:

thanks,yes It works!!! is there any new thing on LMS 3.1. we will have the 3.1 one next few weeks.

Correct Answer
Joe Clarke Fri, 04/03/2009 - 10:14
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    Founding Member

In LMS 3.1, the Campus Manager Port Attributes report is now schedulable, and exportable. This provides much of the data you want.

Actions

This Discussion