04-02-2009 02:55 PM
how I can generate and schedule a report for detail port usage/capabilities like if the port is 10/100/100 on switches.
Solved! Go to Solution.
04-03-2009 10:14 AM
In LMS 3.1, the Campus Manager Port Attributes report is now schedulable, and exportable. This provides much of the data you want.
04-02-2009 04:22 PM
What version of LMS?
04-03-2009 06:50 AM
oh ..sorry! LMS 2.6 what I am trying to do is to report for different groups owns different switch. to report them like there switch status including port, server mac address, server ip addresses, server name, port speed setting, port duplex setting, actual speed, actual duplex, vlan and trunking information. it's looks like a combination of end host report + switch report.any suggestion for my objective.
04-03-2009 08:23 AM
sorry!!! my statement was wrong actually in simple word I want a the report equivalent output of " sh interface status"
how I can meet my objective on LMS 2.6
04-03-2009 09:27 AM
The best thing to do for LMS 2.6 is Netshow. Just schedule a Netshow job to run "show interface status", then look at the results. These results can also be exported and printed. Netshow can be found under RME > Tools > NetShow.
04-03-2009 09:48 AM
thanks,yes It works!!! is there any new thing on LMS 3.1. we will have the 3.1 one next few weeks.
04-03-2009 10:14 AM
In LMS 3.1, the Campus Manager Port Attributes report is now schedulable, and exportable. This provides much of the data you want.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide