X25, issue with translate statements

Unanswered Question
Apr 2nd, 2009

Hi all,

I'm trying to setup a packet flow between Host A and B using netperf but i am unable to generate the packet. I think i'm missing something with the translate statements. Please advice if the statements i have are not correct.

(pls reference diagram)

*DNS routing for X25

Router A

---------

TCP to X25

translate tcp 192.168.1.13 4000 x25 0404456368002

X25-TCP

translate x25 0404456368005 printer 192.168.1.1 port 4000

Router B

--------

TCP to X25

translate tcp 192.168.2.13 4000 x25 0404456368005

X25 to TCP

translate x25 0404456368002 printer tcp 192.168.2.1 port 4000

Attachment: 
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
tstanik Thu, 04/09/2009 - 15:15

Troubleshooting translation.

Certain show commands which allows you to view an analysis of show command output.

• show debug-enables you to display a variety of debug information, or to perform specific troubleshooting activities.

• telnet x.x.x.x -connects to computer systems on the Internet in prompt mode.

• pad 345-logs you on to a PAD.

• show x25 vc-displays information about active switched virtual circuits (SVCs), and permanent virtual circuits (PVCs) in privileged EXEC mode.

http://www.cisco.com/en/US/tech/tk713/tk730/technologies_configuration_example09186a0080094a46.shtml#test1

Actions

This Discussion