IP http secure-server problems/how to set up

Unanswered Question

Hello. My supervisor wants to use SDM to manage our 1841 router but with secure access (https). I have already set this up for http access but I am having problems with the secure server command. When I run the command ip http secure-server in Global Configuration mode the IOS tells me "invalid input at marker" and points to secure-server as the problem. I read somehwere that I need to obtain a certificate or generate a rsa key pair with the command "crypto key generate rsa" but this command is not recognized as valid either. Do I need to upgrade my IOS (currently version 12.4 (3i). What am I doing wrong? I just want to enable https access for SDM. Please, any help would be very appreciated.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Collin Clark Fri, 04/03/2009 - 12:09

You need an image the has crypto (look for k9 in the image name). Post a show version and we can help you get the right IOS image.

Hope this helps.

Thanks Collin. Here are my show version results.

CC#show ver

Cisco IOS Software, 1841 Software (C1841-IPBASE-M), Version 12.4(3i), RELEASE SO

FTWARE (fc2)

Technical Support: http://www.cisco.com/techsupport

Copyright (c) 1986-2007 by Cisco Systems, Inc.

Compiled Wed 28-Nov-07 18:17 by stshen

ROM: System Bootstrap, Version 12.4(13r)T, RELEASE SOFTWARE (fc1)

CC uptime is 8 weeks, 19 hours, 46 minutes

System returned to ROM by power-on

System image file is "flash:c1841-ipbase-mz.124-3i.bin"

Cisco 1841 (revision 7.0) with 114688K/16384K bytes of memory.

Processor board ID FTX1239Z1CD

2 FastEthernet interfaces

1 Serial interface

WIC T1-DSU

DRAM configuration is 64 bits wide with parity disabled.

191K bytes of NVRAM.

495432K bytes of ATA CompactFlash (Read/Write)

Configuration register is 0x2102

Actions

This Discussion