Eigrp Bandwidth

Unanswered Question
Apr 4th, 2009
User Badges:

Hello All,

I wanted to configure an interface bandwidth at 15% and not allow to use "ip bandwidth percent" therefore left with the option of "bandwidth" at the interface level, i know this could be achieved by doubling the number in order to arrive at the 50% which is the required value.

My problem is that the book configured bandwidth at 30000 in order to gain the 50% needed, but wondering why this wasn't configured at 30,000,000 since we need 15million bits (15Mbps)?.

Please help

Thanking you all in advance

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Istvan_Rabai Sat, 04/04/2009 - 10:28
User Badges:
  • Gold, 750 points or more

Hi NetMan,

The interface "bandwidth" command expects the bandwidth given in kbits/sec.

"bandwidth 30000" means 30000 kbits/sec that is 30 Mbits/sec.




This Discussion