cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
2037
Views
0
Helpful
1
Replies

password recovery for cisco 6506

ssamiullah
Level 1
Level 1

please let me knew the password recovery for 6506 core switch. Tried the standard method of using Break key,but still the switch is booting up the IOS and not going into Rommon mode...please find below details

00:03:19: %DIAG-SP-6-DIAG_OK: Module 1: Passed Online Diagnostics

00:03:20: %OIR-SP-6-INSCARD: Card inserted in slot 1, interfaces are now online

00:03:30: %PM_SCP-SP-3-TRANSCEIVER_UNSUPPORTED: Unsupported transceiver in LAN port 1/6

User Access Verification

Password:

System Bootstrap, Version 8.5(2)

Copyright (c) 1994-2007 by cisco Systems, Inc.

Cat6k-Sup720/SP processor with 1048576 Kbytes of main memory

Autoboot executing command: "boot bootdisk:"

Initializing ATA monitor library...

string is bootdisk:s72033-ipbase-mz.122-33.SXH4.bin

Loading image, please wait ...

Initializing ATA monitor library...

Self extracting the image... [OK]

Self decompressing the image : ##########################################################################

################################################################################### [OK]

1 Reply 1

Press Break on the terminal keyboard right after the RP gains control of the console port. On the Catalyst 6000 that runs Cisco IOS Software, the SP boots first. After it has booted, it turns control over to the RP. After the RP gains control, initiate the break sequence. The RP gains control of the console port when you see this message. (Do not initiate the break sequence until you see this message):

00:00:03: %OIR-6-CONSOLE: Changing console ownership to route processor

More info at:

http://www.cisco.com/en/US/products/hw/switches/ps700/products_password_recovery09186a0080133fb1.shtml

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco