04-05-2009 11:43 PM - edited 03-06-2019 05:00 AM
Hi All,
I am currently testing the PBR feature and i would like to know how it functions.
the scenario is the following:
we would like to redirect the traffic to SWITCH2 when the destination is an IP from the subnet 10.160.130.0.
i am doing the test from switch 1 by doing an extended traceroute.
the source IP is SVI 990 10.160.123.145.
the test fails, i am still able to reach the directly connected server on switch1. any explanation ?
the configuration and a network diagram that illustrates the scenario are attached.
thank you.
Jean
04-06-2009 12:06 AM
Jean,
First of all, Router generating traffic will not work. You have to use "ip local policy route-map".
A defined route-map named "PBR_Route_Map_Testing". At the interface level I saw "PBR_Route_Map". Typo?
I would test by using other hosts in network,10.160.123.0/24.
HTH,
Toshi
04-06-2009 12:53 AM
Hi Toshi,
yes it's a type so i need to use the local policy route-map in case i need to test the PBR from the router itself?
thanks
04-06-2009 12:56 AM
Jean,
You got it. That's what I'm talking about.
HTH,
Toshi
04-06-2009 01:05 AM
Thanks Toshi, this was very helpful.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: