04-05-2009 11:45 PM - edited 03-15-2019 05:19 PM
In the configuration guide it states that the mobility softkey when not in a call can be used to disable or enable the mobile connect feature.
However, this softkey is not working. All the other things are working fine. The user has to enable/disable this feature using the user options web page.
When you press the mobility softkey, it just says: "MobileConnectOn".
I have read several things on this forum, but nobody came up with a solution. I don't want a workarround, I want a working softkey as described in the config guides.
Best Regards,
Wouter Eelen
Solved! Go to Solution.
04-06-2009 12:13 AM
which version of cucm u have?
04-06-2009 12:13 AM
which version of cucm u have?
04-06-2009 12:17 AM
HI Wouter,
It should work only in CUCM v7
kr
jp
06-16-2009 03:54 PM
I have the same issue in version 6.1.x, i just tested in version 7.x and works fine.
06-29-2009 10:48 PM
I have the same Issue also on CUCM 6.1(3)
but I also it work fine on CUCM 7.0(2)
So Please if anyone come to idea Please Post it
Thanks
06-30-2009 02:43 AM
I have the same problem in 6.1(3)
but its working in 7.0 and 7.1
Any ideas?
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: