ericsson pbx connected to cisco router

Unanswered Question
Apr 6th, 2009
User Badges:

Im having some little problem anybody have idear on it,the problem is i have site to site connetion and i connected ericsson pbx md110 to each site,but when im calling from each site the calling does not appear on it unless the person pick the phone before i see the name,it'is from the router or the pbx.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 1 (1 ratings)
Loading.
jsivulka Fri, 04/10/2009 - 14:10
User Badges:
  • Bronze, 100 points or more

Features Not Supported

• Ericsson PBX did not honor CNIR-Calling Name Identification Restriction

© 2007 Cisco Systems, Inc. All rights reserved.

Important notices, privacy statements, and trademarks of Cisco Systems, Inc. can be found on cisco.com

Page 4 of 54

• Ericsson PBX did not honor CONR- Connected Name Identification Restriction

• Ericsson PBX did not support Network Call Forwarding (CFU, CFB, CFNR) by join. It did diversion by Reroute instead

• Ericsson PBX did not support Q.SIG MWI- Message Waiting Indication (lamp ON, lamp OFF)


Calling/Connected Name and Number Restrictions

To configure Calling/Connected Name and Number Restricted, use the following command:


To configure Calling/Connected Name and Number Allowed, use the following command:


To remove Name, use the following command:


To add Name, use the following command:


To print Station's Name, use the following command:


EXTENSION NAMES

DIR NAME1 NAME2 PRES INFO

1154 BC12-1 FOUR 10

1155 BC12-1 FIVE 10

END


Actions

This Discussion