I have just converted an 1231 AP to LWAPP mode and am trying to add it to my controller.
I am getting the errors as described in
*Mar 1 00:00:25.871: %LWAPP-5-CHANGED: LWAPP changed state to DISCOVERY
*Mar 1 00:00:25.921: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init (SSC): no certs in the SSC Private File
*Mar 1 00:00:25.922: %LWAPP-3-CLIENTERRORLOG: LWAPP Crypto Init: could not start PKI session
*Mar 1 00:00:25.922: %LWAPP-3-CLIENTERRORLOG: Failed to initialize Crypto. Rebooting
The stated resolution is :-
You have an SSC AP. Once you convert to LWAPP AP, add the SSC and its MAC address under the AP Authentication list in the controller
However, how do I determine the SHA1 Hash value that I need to provide when I add the AP to the Auth list ??
Also, when I run a lwapp (capwapp) debug on the controller I do not see ANY messages coming from this AP.
The controller (NM-WLC) is running 5.2.130 and the AP has the latest LWAPP code for the 1200 series.
Any ideas ?
I've seen this problem before. 1230's, ahhhh ... they were built differently.
Use the Cisco Upgrade Tool because it will synchronize with the WLC to generate a SSC.
You'll need to look into Security -> AP Policies.