cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
555
Views
0
Helpful
6
Replies

NAC support on a WLC

rlortiz
Level 1
Level 1

My customer has a Cisco WLC with version 4.2.112.0. They want to incorporate NAC but, they were told they need to have version 5.1. But. when they review cisco IOS page, it says they should be using version 4.2.112.0, which is the version customer already has. So we need to know if they actually have to upgrade or not. Also, is there a license that is needed for whatever version is supported?

6 Replies 6

mchin345
Level 6
Level 6

I think NAC will support on Cisco Wireless LAN Controller (WLC) 4.2.61.0.

It will work.... you just have to use in-band virtual gateway. If you are trying to deploy Out of Band, then you will have to go with 5.1 and NAC 4.5.

http://www.cisco.com/en/US/docs/security/nac/appliance/configuration_guide/45/cam/m_woob.html#wp1148691

-Scott
*** Please rate helpful posts ***

Hi Fella,

Is it right that, WLC and NAC must be in same segment otherwise NAC will not work. If so please can you explain how...

If NAC manager get down then what will happen, NAC Server will be stop to work or it will work as it is.

It depends if you have it setup in-band or out-of-band. In band it should still work, out of band, no new connections.

-Scott
*** Please rate helpful posts ***

If out of band, CAS needs to be L2 adjacent to WLC.

If in band, CAS and WLC can be anywhere...even if they're in two physical locations.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: