04-07-2009 01:02 AM - edited 03-11-2019 08:15 AM
Dear all,
i need to upgrade software as in the subject.
i need the steps as well as configuartion file changes.
Thanks,
04-07-2009 02:20 AM
04-07-2009 03:54 AM
Upgrading from 6.1 to 6.3 wouldn't have any configuration changes.
1) Save the config to tftp server
pixfirewall# write net "ip add":pixconfig
2) Copy the bin file frm tftp to pix
pixfirewall#copy tftp flash
Address or name of remote host [127.0.0.1]? "IP add of tftp server"
Source file name [cdisk]? pix635.bin
3) reload the pix
pixfirewall#reload
if failover is configured on the box.
use #no failover
upgrade on pri, secondary unit
after upgrading on both units issue #failover
HTH
04-07-2009 04:04 AM
i need to know how to convert the configuration file :
for example,
conduit permit tcp host x.x.x.x eq www any
to be aplicable on 6.3(5)
04-07-2009 04:10 AM
04-08-2009 09:29 PM
ex:
where access list 101 is your outside access list.
access-list 101 permit tcp any host 62.192.84.90 eq www
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: