upgrading PIX 6.1(3) to 6.3(5)

ibrahim_hassan · ‎04-07-2009

Dear all,

i need to upgrade software as in the subject.

i need the steps as well as configuartion file changes.

Thanks,

andrew.prince · ‎04-07-2009

see the below guide

HTH>

javzone · ‎04-07-2009

Upgrading from 6.1 to 6.3 wouldn't have any configuration changes.

1) Save the config to tftp server

pixfirewall# write net "ip add":pixconfig

2) Copy the bin file frm tftp to pix

pixfirewall#copy tftp flash

Address or name of remote host [127.0.0.1]? "IP add of tftp server"

Source file name [cdisk]? pix635.bin

3) reload the pix

pixfirewall#reload

if failover is configured on the box.

use #no failover

upgrade on pri, secondary unit

after upgrading on both units issue #failover

HTH

ibrahim_hassan · ‎04-07-2009

i need to know how to convert the configuration file :

for example,

conduit permit tcp host x.x.x.x eq www any

to be aplicable on 6.3(5)

javzone · ‎04-07-2009

hope this link helps

thanks

lreger · ‎04-08-2009

ex:

where access list 101 is your outside access list.

access-list 101 permit tcp any host 62.192.84.90 eq www